Keating-of-chicago Filter System Thermostat Uživatelský manuál stáhnout pdf

www.keatingofchicago.com 1-800-KEATING

SERVICE INSTRUCTIONS

7/98

VkngRbltPmp

VIKING REBUILT PUMP KIT

A. To Replace “O” Rings (refer to exploded view)

1. Remove 4 bolts #8. The housing will come apart. Replace “O” rings making sure the

“O” ring is in the groove in the housing.

B. To Replace Lip Seal

1. The lip seal is located in the bracket Item #1. Using a flat blade screwdriver, knock

out the old lip seal. CAUTION: Be careful not to damage the bearings.

2. Using an Arbor Press, press the new lip seal into the bracket #1.

3. Replace all sections of the pump making sure none of the “O” rings are pinched

between the sections.

4. Tighten down the 4 bolts by alternating between them.

ITEM DESCRIPTION

1 Bracket, lipseal & bearing section

2 Match ground casing & (2) gears, driver & driven shafts

3 Separation plate & bearing assembly

4 Head and alignment sleeve assembly

6 Lipseal

7 O-ring

8 Assembly capscrews

Typical SG-07

Exploded View

SERVICE INSTRUCTIONS 1

Shrnutí obsahu

Strany 1 - SERVICE INSTRUCTIONS

www.keatingofchicago.com 1-800-KEATINGSERVICE INSTRUCTIONS7/98VkngRbltPmpVIKING REBUILT PUMP KITA. To Replace “O” Rings (refer to exploded view)1. Rem

Komentáře k této Příručce

Žádné komentáře

Keating-of-chicago Filter System Thermostat Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Kontrolní panel Keating-of-chicago Filter System Thermostat. Keating Of Chicago Filter System Thermostat User Manual [en] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce